WASHER REPAIR PRO
A code is a clue.
Match the washer first.
Choose the brand and copy the exact display. Our reviewed library explains the condition and model limits without diagnosing a failed part.
Browse by washer brand
All reviewed code guides
| Code or display | Condition / context | Reviewed guide |
|---|---|---|
| OE | Water is not draining as expected. | Read LG OE guide → |
| LE | The drum is not rotating properly. | Read LG LE guide → |
| UE | The washer cannot complete a balanced spin with the current load. | Read LG UE guide → |
| IE | The washer is not reaching the expected water level during filling. | Read LG IE guide → |
| CL | Child Lock or Control Lock is enabled; CL is normally a status indicator. | Read LG CL guide → |
| 5C / 5E | The washer reports slow or unsuccessful drainage. | Read Samsung 5C / 5E guide → |
| 4C | The washer is not receiving water as expected. | Read Samsung 4C guide → |
| SUd | Excess suds have interrupted the cycle; this message alone is not a failed-part diagnosis. | Read Samsung SUd guide → |
| dC | Model identification is required: dC can indicate a door condition or an unbalanced load. | Read Samsung dC guide → |
| F9 E1 | The washer reports an extended or unsuccessful drain. | Read Whirlpool F9 E1 guide → |
| F21 | A drainage problem has been detected. | Read Whirlpool F21 guide → |
| LoC | Control Lock is active; the display is a status reminder, not an error by itself. | Read Whirlpool LoC guide → |
| H2O Supply | The washer reports a fill/supply condition; the complete message and exact model determine the next checks. | Read GE H2O Supply guide → |
| H2O | On matching dual-tank SmartDispense top-load models, H2O can indicate that both detergent and softener tanks have reached low levels. | Read GE H2O guide → |
| E11 | The front-load washer is not filling as expected during the wash stage. | Read Electrolux E11 guide → |
No code or unknown model?
Start with the symptom-based repair check. A blank display, leak or wet load can still be described accurately.